Hy-Grip modified bituminous membranes are manufactured to the highest level of international quality standards and are offered for a variety of applications. Hy-Grip membranes are manufactured for roofs, re-roofing, accessible and non-accessible roofs, car parking decks, and a variety of other applications both in the domestic and industrial sectors.
HY-GRIP RANGE OF MEMBRANES FOR EXPOSED APPLICATION
Products:
GRADE
THICKNESS
TOP FINISH
SELF ADHESIVE MEMBRANES:
ELASTOMAT ITSELF PG-2000
PG-2000
2.0mm
Granules
TORCH APPLIED MEMRANES:
PLASTOMAT SUNTAN
PG-4000
4.0mm
Granules
PLASTOMAT SUNTAN
PA-4000
4.0mm
Aluminium Foil
PLASTOMAT SHIELD
PG-3000
3.0mm
Granules
PLASTOMAT SHIELD
PA-3000
3.0mm
Aluminium Foil
PLASTOMAT ECONOTOP
PG-3000
3.0mm
Granules
PLASTOMAT ECONOTOP
PA-3000
3.0mm
Aluminium Foil
PLASTOMAT ECONOTOP
PA-4000
3.0mm
Aluminium Foil
EXPOSED APPLICATION
means applied membranes are left exposed on flat,Slope roofs and flashing. The only Granules and Aluminum Foil finish of HY-GRIP membranes are recommended for exposed system provides effective protection to the membrane against U. V. and weathering stresses.
HY-GRIP RANGE OF MEMBRANES FOR COVERED APPLICATION:
Products:
GRADE
THICKNESS
TOPFINISH
SELF ADHESIVE MEMBRANES:
ELASTOMAT ITSELF P-1500
P-1500
1.5mm
HDPE
ELASTOMAT ITSELF P-2000
P-2000
2.0mm
HDPE
ELASTOMAT ITSELF F-1700
F-1700
1.7mm
HDPE
TORCH APPLIED MEMRANES:
PLASTOMAT SUNTAN PP-4000
PP-4000
4.0mm
Polyethylene
PLASTOMAT SUNTAN PP-4000
PS-4000
4.0mm
Fine Sand
PLASTOMAT SHIELD PP-3000
PP-3000
3.0mm
Polyethylene
PLASTOMAT SHIELD PP-3000
PS-3000
3.0mm
Fine Sand
COVERED APPLICATIONmeans applied membranes must be covered permanently by protection of concrete, cement/sand, screed, Gravel, Precast, Concrete paver and sand filling or equivalent is recommended.
NOTE: SELF-ADHESIVE MEMBRANES: The lower surface is covered with release able siliconized paper. TORCH APPLIED MEMRANES:The lower surface is covered with Torch able polyethylene film.